Cross Beater Mill SK 100

Cross beater mill SK 100The Cross Beater Mill SK 100 comfort is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials with a hardness of up to approx. 6 on Mohs' scale. The SK 100 is intended for universal use: from sample preparation in laboratories and industrial plant, through pilot installations up to preparing sample batches in production facilities.

Application Examples

cement clinker, coke, glass, gravel, minerals, ores, oxide ceramics, slags, soils and many other similar materials

Product Advantages

  • high throughput
  • high final fineness
  • versatile in use
  • easily changeable bottom sieves
  • wide range of accessories
  • maintenance-free direct drive
  • safe design to CE standard
  • 2-year warranty
Features

 

Applications size reduction
Feed material medium-hard, brittle
Material feed size* < 15 mm
Final fineness* < 100 µm
Collector capacity 5 or 30 l
Throughput* up to 80 kg/h
Motor speed at 50 Hz (60 Hz) 2850 min-1 (3420 min-1)
Drive 3-phase and 1-phase motors
Power consumption 1,1 kW
W x H x D 560 x 1200 x 700 mm (with base frame)
Net weight ca. 58 kg (with base frame)

*depending on feed material and instrument configuration/settings

Function Principle Cross beater mill SK 100Size reduction in the SK 100 takes place by hammering, impact and shearing effects. The feed material passes from the hopper directly into the center of the grinding chamber, where it is caught by the cross beater and ground between the baffle plates of the cross beater and the toothed grinding insert. As soon as the material is smaller than the aperture size of the bottom sieve used, it passes through the sieve and enters the collecting receptacle. The air drawn in through the hopper by the cross beater accelerates the discharge of the ground material. The airborne fine fraction is separated off by a downstream filter system.


Product overview

Rotor Mills 

 

 

News

A legend is born

The all new ARTUS 8 is the latest addition to ARUN’s portfolio of metal analysers. It completes the offering to higher end applications. Its primary field of applications are in foundries, metal producing and metal processing industries.
more »
Do not miss out! New campaign from RETSCH GmbH called "The Future is Now - New Dimensions in Sample Preparation and Particle Analysis".
more »
CEM brings a remarkable intelligence and ease of use to microwave sample preparation with the new MARS 6 System!
more »

Our Address

"MACROLAB Ltd"
tel.    +38-044-258-34-01
fax.  +38-044-258-34-01
mob. +38-050-386-57-70
         +38-067-537-32-57
e-mail: info@macrolab.com.com
http://www.macrolab.com.ua/

 
 
home | catalog | service | news | about us | our partners | contact
© 2007 Macrolab. Development by Freesia 2007.