Tube Furnace up to 1600°C ‑ STF / TZF

The Carbolite Gero STF single zone and TZF 3-zone high temperature tube furnace range is available at 1500 °C and 1600 °C with both models using silicon carbide heating elements.

This range of tube furnaces does not include an integral work tube and one must be selected as an additional item. The work tube length is dependent on the application eg for use with modified atmosphere or vacuum.

The TZF 3-zone high temperature tube furnace has heated lengths of 450 and 610 mm. An extended uniform zone in the mid-section of the work tube is achieved with the use of end zone controllers which track the centre zone temperature and compensate for the loss of heat from the tube ends.

Standard features


  • 1500°C & 1600°C maximum operating temperatures
  • Single zone models fitted with Carbolite Gero 301 PID controller with single ramp to setpoint and process timer
  • 3-zone models fitted with 1 x programmable 3216P1 and 2 x 3216CC end zone controllers, with retransmission of setpoint
  • Accepts work tubes up to 60 or 90 mm outer diameter depending on model
  • Heated lengths, single zone 180, 450 or 610 mm (STF)
  • Heated lengths, 3-zone 450 or 610 mm (TZF)
  • Silicon carbide heating elements
  • Horizontal configuration
Options (specify these at time of order)

  • A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
  • Over-temperature protection (recommended to protect valuable contents & for unattended operation)
  • Alternative mounting options are available
  • Optionally configured for 2 phase or 3 phase electrical supply (depending on model)
  • A range of additional work tubes, end seals and work tube packages is available for use with modified atmosphere and/or vacuum
  • Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
  • Wide choice of tube diameters and materials is available: eg quartz, ceramic, metal
  • Insulation plugs & radiation shields to prevent heat loss & improve uniformity
  • Control module with 2 meter conduit to furnace (TZF)
Hook and strap work tube support
Content may be subject to modifications or corrections

News

A legend is born

The all new ARTUS 8 is the latest addition to ARUN’s portfolio of metal analysers. It completes the offering to higher end applications. Its primary field of applications are in foundries, metal producing and metal processing industries.
more »
Do not miss out! New campaign from RETSCH GmbH called "The Future is Now - New Dimensions in Sample Preparation and Particle Analysis".
more »
CEM brings a remarkable intelligence and ease of use to microwave sample preparation with the new MARS 6 System!
more »

Our Address

"MACROLAB Ltd"
tel.    +38-044-258-34-01
fax.  +38-044-258-34-01
mob. +38-050-386-57-70
         +38-067-537-32-57
e-mail: info@macrolab.com.com
http://www.macrolab.com.ua/

 
 
home | catalog | service | news | about us | our partners | contact
© 2007 Macrolab. Development by Freesia 2007.