| |
Tube furnace with eight zones ‑ AZ
With eight zones, thick insulation, and highly symmetrical winding of the heating elements throughout the entire AZ furnace, a uniformity of better than ± 5 °C is achieved. A key advantage of the eight individually controlled zones is the extension of the uniform length inside the furnace. Additionally, the temperature profile can be precisely controlled for linear increases, peaks, or other user defined profiles.
One process well suited for the AZ tube furnace is chemical vapour deposition as a temperature gradient can be established in the furnace for evaporation of precursor material at the high temperature end zone and sublimation of the vapour onto the substrate at the cooler temperature end zone. All zones are individually controlled and monitored with thermocouples.
Application Examples
annealing, crystal growing, drying, Evaporation, sublimation, synthesis
Standard features
- Similar construction to FHA / FHC tube furnaces
- Eight-zone control for variable heating profiles
- Gradients, linear increase/decrease etc. of temperature along the heated length
- Extended uniform temperature distribution
- Short heating and cooling rates
- Automatic operation
- Data recording for quality management
- Retransmission of setpoint
Options (specify these at time of order)
- A range of sophisticated digital controllers, multi-segment programmers and data loggers is available. These can be fitted with RS232, RS485 or Ethernet communications
- Over-temperature protection (recommended to protect valuable contents & for unattended operation)
- Wide choice of tube diameters and materials is available: eg quartz, ceramic, metal
- 'L' stand for vertical usage
- Insulation plugs & radiation shields to prevent heat loss & improve uniformity
- Modified atmosphere and vacuum assemblies are available
- Vacuum packages with a choice of rotary vane pump or turbomolecular pump are available for furnaces with tube inner diameters of 60 mm and above
- Complete automation by Siemens SPS control with touch panel and mass flow controller for the gases on request
- Other diameters and heated lengths on request
Technical details 
View inside
- ceramic fibre insulation
- outer frame
- eight thermocouples for control
- usable volume
The ceramic fibre insulation is constructed in multiple layers and assembled with great care to ensure no gaps are present between each of the layers. The insulation layers are arranged with a specific overlap to provide excellent temperature uniformity inside the furnace.
The control module is very compact and built into the support frame of the furnace. A touch panel interface provides user-friendly and intuitive control of the furnace operating parameters.
No water cooling is necessary as the housing is spaced from the insulation such that it is cooled by convective cooling. The only instances that require water cooling are for use with cooled work tube flanges, i. e. to assemble a vacuum pumping unit.
Content may be subject to modifications or corrections
|
|
News
|
A legend is born
The all new ARTUS 8 is the latest addition to ARUN’s portfolio of metal analysers. It completes the offering to higher end applications. Its primary field of applications are in foundries, metal producing and metal processing industries.
Do not miss out! New campaign from RETSCH GmbH called "The Future is Now - New Dimensions in Sample Preparation and Particle Analysis".
CEM brings a remarkable intelligence and ease of use to microwave sample preparation with the new MARS 6 System!
|
Our Address
|
|
"MACROLAB Ltd"
tel. +38-044-258-34-01
fax. +38-044-258-34-01
mob. +38-050-386-57-70
+38-067-537-32-57
e-mail: info@macrolab.com.com
http://www.macrolab.com.ua/
|
|
|
